NETGEAR UTM5 - Page 446

Monitoring System Access and Performance
446
ProSecure Unified Threat Management (UTM) Appliance
Figure 264.
2. Enter the settings as explained in the following table:
Table 111. Alerts screen settings
Setting Description
Enable Traffic
Meter Limit Alerts
Select this check box to enable traffic meter limit alerts. This check box is cleared by
default.
Enable Update
Failure Alerts
Select this check box to enable update failure alerts. This check box is cleared by
default.
Enable License
Expiration Alerts
Select this check box to enable license expiration alerts. This check box is selected by
default.
Enable ReadyNAS
Failure Alerts
Select this check box to enable ReadyNAS failure alerts. This check box is cleared by
default.