Monitoring System Access and Performance
457
ProSecure Unified Threat Management (UTM) Appliance
 To set the poll interval:
1. Click the Stop button.
2. From the Poll Interval drop-down list, select a new interval. The minimum is 30 seconds; the
maximum is 20 minutes.
3. Click the Set Interval button.
 To set the monitoring period:
From the Period drop-down list, select a period from 60 seconds to 4 weeks. The information
onscreen adjusts.
 To filter the information that is displayed onscreen:
From the Filter drop-down list, select Application, Category, User Name, or IP Address.
The information onscreen adjusts.
The following table explains the fields of the Application Dashboard screen:
Table 116. Application Dashboard screen
Item Description
No. The item number in the table.
Name The name that is displayed depends on the selection from the Filter drop-down list:
• Application. The field displays the name of the application or protocol. This is the
default setting.
• Category. The field displays the name of the application category.
• User Name. The field displays the user name.
• IP Address. The field displays the IP address.
Sessions The number of sessions during the monitoring period, which you can set by making a
selection from the Period drop-down list.
Avg Rates (Kbps) The average traffic rate in Kbps used during the monitoring period by the application,
protocol, category, user, or IP address.
Total Bytes The traffic in bytes used during the monitoring period by the application, protocol, category,
user, or IP address.
Total Packets The number of packets used during the monitoring period by the application, protocol,
category, user, or IP address.
Detail Click the View table button to display the Application Dashboard Detail pop-up screen,
which lets you drill down to more specific information.
To Next Page
Loading...
Need help?
General