Monitoring System Access and Performance
473
ProSecure Unified Threat Management (UTM) Appliance
Figure 282.
2. Select the Status option arrow in the upper right of the Port Triggering screen. The Port
Triggering Status screen displays in a pop-up screen.
Figure 283.
The Port Triggering Status screen displays the information that is described in the
following table:
Table 126. Port Triggering Status pop-up screen information
Item Description
# The sequence number of the rule on screen.
Rule The name of the port-triggering rule that is associated with this entry.
LAN IP Address The IP address of the computer or device that is currently using this rule.
Open Ports The incoming ports that are associated with this rule. Incoming traffic using one of
these ports is sent to the IP address that is listed in the LAN IP Address field.
Time Remaining The time remaining before this rule is released and made available for other
computers or devices. This timer is restarted when incoming or outgoing traffic is
received.
To Next Page
Loading...
Need help?
General