Configuration Printer
A29247-X6-X-6-7670 187
The AFP data stream will be converted into Postscript and the generated Xerox-Job-Ticket
is integrated into the Postscript file. This file will be transferred to the DocuTech via LPR
command.
Set Up of Backend:
Create a new PRISMA printer of driver DocuTech.
In the ’General’ tab set the IP-address of the DocuSP server and the name of the "lp" print
queue, already defined on the DocuSP server.
The backend is ready-to-print after set up of IP-address and name of remote queue. All oth-
er settings are to be performed by a service engineer/administrator only. These settings al-
low to optimize the workflow between the PRISMA system and the DocuTech. They have
to be modified only, if the jobs will be sent to an external postprocessing unit This unit has
an own name, which must be inserted.
Note: For details concerning the print parameters see PRISMAproduction Server Admin-
istrators Guide.
VarioPrint 2090-, VarioPrint_2105 and VarioPrint 31xx-Backend
A backend / driver, specially designed for the VarioPrint family, is available in V3.02 to drive
a VarioPrint 2090/2105/31xx. This backend is organised basically like other backends (ftp-
backend). It is the task of the VarioPrint-backends to print a POD-AFP data stream on a
VarioPrint xx and to convert all relevant information of the PRISMA Job-Ticket to a Vario-
Print-Job-Ticket (Océ-Job-Ticket OJT).
The AFP data stream will be converted into Postscript and the generated Océ-Job-Ticket
is integrated into the Postscript file. This file will be transferred to the VarioPrint printer via
LPR command.
Set Up of Backend:
Create a new PRISMA printer with the Océ Postscript driver.
In the ’General’ tab set the IP-address of the Host and the name of the "lp" print queue, in
which the backend is to print it’s data. Commonly you use ’STANDARD’ for both parame-
ters.
The backend is ready-to-print after set up of IP-address and name of remote queue.
Note: For details concerning the print parameters see PRISMAproduction Administrator
Guide.
To Next Page
Loading...
