43967002TH Rev.1
113 /
Oki Data CONFIDENTIAL
3. Installation
Fax Setup
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
Default
Settings
Doc. Type Normal
Fine
Ext-Fine
Photo
Background
Set default setup of selecting image
quality when scanning document.
Density Lightest
Lighter
Normal
Darker
Darkest
Set default setup of density when
scanning document.
Scan Size Auto
Letter
Letter
Tabloid
Legal 14
H. LTR
A3
B4
A4
A4
B5
A5
Set default setup of the document
scanning area.
Cont. Scan OFF
ON
Select default setup to inquire or not
to inquire if next page of document is
ready.
TTI OFF
ON
Set whether or not to print sender’s
name on document when it is printed at
destination.
MCF Report OFF
ON
Set whether or not to print result of
transmission automatically.
Memory Tx OFF
ON
Set default setup of memory
transmission.
When it is set to OFF, real-time
transmission takes place.
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
F-code Box Register/
Edit
Secure Box Name of box Enter name of confidential document
box.
Sub-Address Enter name of confidential document
box.
More than 1 character and maximum 20
characters, 0 to 9 (Numeral only)
Password Enter name of confidential document
box.
More than 1 character and maximum 20
characters, ‘0’-‘9’, ‘#’, ‘*’ (Numeral only)
Retention
period
00 to -31 days
Security
identification
number
Enter password of confidential document
box.
4 characters fixed, 0 to 9 (Numeral only)
Bulletin Box
Name of box Enter name of bulletin board box.
Maximum 16 half-sized characters,
maximum 8 full size characters (Number
of characters is same to confidential.)
Sub-Address Enter sub address of bulletin board box.
More than 1 character and maximum 20
characters, 0 to 9 (Numeral only)
Password Enter password of bulletin board box.
More than 1 character and maximum 20
characters, ‘0’-‘9’, ‘#’, ‘*’ (Numeral only)
Rx Protect OFF
/ ON
When set to ON, F code
bulletin board reception is
prohibited. Bulletin board polling
transmission only is permitted.
Auto Print OFF
/ ON
When set to ON, received image
data is printed automatically
when F code bulletin board
reception is completed.
To Next Page
Loading...
