43967002TH Rev.1
130 /
Oki Data CONFIDENTIAL
3. Installation
*1. When exiting the menu after changing the setups by using the local interface menu, the
confirmation screen telling “If change takes place, the MFP reboots automatically. Do you really
want to do it?” is displayed. When Yes is selected, the MFP reboots automatically.
If No is selected, the setups are not changed and the MFP exits the menu.
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
Power Save Power Save Enable OFF
ON
Setting ON/OFF of Power Save mode.
Power Save Time 5 minutes
15 minutes
30 minutes
60 minutes
240 minutes
Set the time to enter the Power Save
mode.
Memory
Setup
Receive Buffer Size Auto
0.5 MB
1 MB
2 MB
4 MB
8 MB
16 MB
32MB
Set receive buffer size that the local
interface secures.
Resource save area Auto
OFF
0.5 MB
1 MB
2 MB
4 MB
8 MB
16 MB
32MB
Set the resource save area.
Flash
Memory
Setup
Initialization Execute Initialize the Flash memory
Delete the registered Demo data.
HDD Setup Initialization Execute Initialize hard disk.
Demo data and print job are deleted
Format PCL
Common
PS
Format hard disk.
Demo data and print job are deleted.
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
Storage
Maint Setup
Check File System *1 Execute Resolves the un-match between the
actual (free) space and displayed free
space of file system, and recovers the
control data (FAT information.)
Check All Sectors *1 Execute Execute recovery of the HDD sector
information defect and provide solution
for un-match of the above file systems.
HDD Erase *1 Execute Execute: Erase all data of hard disk
Demo data and print job are deleted.
To Next Page
Loading...
Need help?
Printing Specifications
Weight and Dimensions
