Oki MC860 - Page 358

Oki Data CONFIDENTIAL
7. Troubleshooting
43967002TH Rev. 1
358 /
Change encryption strength with AdminManager
1. Launch AdminManager and select (by highlighting) a desired printer from the
printer list.
5. Ch
eck the “Encryption Strength”.
2. Press the “Oki Device Setup” button, or alternately select “Setup”
“Oki Device
Setup”, and open the setup screen.
3. Input the administrator password and open the setup screen as an administrator.
4. Select the “SSL/TLS” tab.
6. Set the “Encryption Strength” to “Weak” and press the “Apply” button.
7. Check the setup contents, and press “OK”.