Oki Data CONFIDENTIAL
7. Troubleshooting
43967002TH Rev. 1
375 /
6. Fix the junction between the image drum cartridge and toner
cartridge with vinyl adhesive tape.
Note! Pack the image drum cartridge with the MFP before transport. Securely seal
the junction with vinyl tape so that toner never comes out.
Vinyl tape (from the back side also)
Image drum cartridge
Top cover
5. Remove the four image drum cartridges and place them on a
flat workbench.
Failure to observe the caution may
result in burn injury.
The fuser unit gets very hot. Do not touch the fuser unit.
7. Close the top cover.
8. Return the document table to the original position.
To Next Page
Loading...
