Oki Data CONFIDENTIAL
7. Troubleshooting
43967002TH Rev. 1
376 /
9. Separate the nit.
If add-on tray unit is not installed, go to step 10.
When separating the MC860, separate it by reversing the steps of installation. For details,
refer to “Add-on tray unit” (Basic Operation edition).
10. Protect the MC860 with cushions.
Note! Use the packing cartons and cushions that have been used to deliver the
MC860 to your location at the time of purchase.
Memo When re-installing the MC860 after transport, peel off the tape that fixes the
im
age drum cartridge and toner cartridge.
Aft
er transporting the MC860, be sure to release the mirror carriage lock
before turning ON the power. Set the mirror carriage transport mode to OFF.
11. Be sure to hold the MC860 with three persons or more to transport.
To Next Page
Loading...
