43967002TH Rev.1
86 /
Oki Data CONFIDENTIAL
3. Installation
5. Set up the duplex unit with the printer driver
Setup must be entered in order to recognize the duplex unit by using the printer driver.
If the printer driver is not set yet, set the printer driver by referring to the MC860 User’s
Manual, and perform the following setups.
For those who use Windows PS printer driver
Open the file that you want to print.
Select the [File] menu and [Print].
Click [Detailed setting].
(This operation is not required in Windows 2000.)
Select the [Layout] tab - [Both-side print] - [Binding long side].
Execute print.
For those who use Windows PCL / PCL XPS
Open the file that you want to print.
Select the [File] menu and [Print].
Click [Detailed setting].
(This operation is not required in Windows 2000.)
Select the [Set] tab - [Both-side print] - [Binding long side] or [Binding short side].
Execute print.
To Next Page
Loading...
