Getting Started FLUOVIEW/Online Help
IV.
OPERATION INSTRUCTIONS
IV.
1-65
Page
2. Select the <Scope Control> button on the bottom of the [Settings] sub-panel. The
[Microscope Control panel] window as shown below appears.
(Combination with BX)
[Light Path] group box
Selects the light path. <BI> is for
direct observation, <LSM> is for
LSM observation and <TV> is for
TV observation.
[Shutter] group box
Clicking inside the box switches the EPI
shutter to be closed/opened,
The shutter is opened.
The shutter is closed.
[Mirror Unit] group box
Clicking the cube automatically
switches the turret.
[Nosepiece] group box
Click to change the objective.
[Top Lens] group box
Clicking inside the box switches the
top lens to be engaged into the light
path.
The top
lens is engaged into the light oath.
The top
lens is disengaged from the light
path.
[Condenser Turret] group box
Clicking the universal condense
automatically switches the turret.
[Aperture Iris] group box
Changes the AS value.
[EPI lamp]
Indicates the EPI lamp.
[Options] group box
Used for optional BX settings.
<Link Setting> button
Selects the function to change
settings corresponding to the change
of BX settings.
<Focus Setting> button
Enables parfocal corrections and
adjustments of jogging sensitivity for
the objectives.
[Lamp] group box
Clicking inside the box switches the
TD lamp ON/OFF.
The TD lamp is set to OFF.
The TD lamp is set to ON.
[Filter Turret] group
box
Clicking the filter for
reflected light
observation to be set
switches the turret
automatically.
[Filter Turret] group box
Clicking the filter for visual
observation to be set switches the
turret automatically.
[Filter Turret] group box
Clicking the filter for
transmitted light observation
to be set switches the turret
automatically.
To Next Page
Loading...
