Olympus FLUOVIEW FV300 - Loading a Protocol of Previous Format

APPLIED OPERATIONS/Protocol processor
IV. OPERATION INSTRUCTIONS
IV . 2-173
Page
2-4-6 Loading a protocol of previous format
FLUOVIEW software Ver4.2 inform the protocol data conversion when the software
reads previous version of the data.
The rule of the conversion is explained below.
Rule A
x Before Ver4.2, Frame = XYT or XYZT is converted to XYT or XYZT in count of Z
slice parameter.
࡮ If Z Slices = 1, the Frame becomes XYT.
࡮ If Z Slices is more than 1, the Frame becomes XYZT.
࡮ If the Frame is continuous one, Frame becomes Series.
Fig. 2-51 Sample Program (FRAP)
Rule B
x Before Ver4.2, Frame (Separate) is converted with condition of Track and Z
slices.
x If Condition = 1, and Z slice =1, Frame becomes XY.
x If Condition is more than 1, and Z slice = 1, Frame becomes XYT.
x If Condition = 1, and Z slice is more than 1, Frame becomes XYZ.
x If Condition and Z slice are more than 1, Frame becomes XYZT.