Getting Started FLUOVIEW/Outline of LSM Observation Procedures
IV.
OPERATION INSTRUCTIONS
IV
. 1-52
Page
1-2-15 Saving Image
1. Display the [File I/O] panel.
2. When saving images acquired with more than one channel, it is possible to select
whether images from more than one image are saved simultaneously or only one of
the images is saved.
Use the <Display channel switch> buttons to select the images to be saved. The
selected images will be saved under the conditions set for each channel.
Example) When only the image of Channel 1 is displayed, only the image of
Channel 1 will be saved.
3. Select the <Experiment> button in the [Save] group box. The [Save Experiment As]
dialog box will appear.
<Display channel switch>
buttons
To Next Page
Loading...
