APPLIED OPERATIONS/Image Processing
IV.
OPERATION INSTRUCTIONS
IV .
2-240
Page
z To divide an image by an image:
Click the <Divide 2 Images> button in the [Multi Image Operations] group box. A
new [Display] panel showing [Image/Image] in the page tab appears, displaying the
image obtained by the division operation.
To divide an image by a constant:
Click the <Divide Image by> button in the [Scalar Operations] group box. A new
[Display] panel showing [Image/Const] in the page tab appears, displaying the
image obtained by the division operation.
2-6-3-5 NOT Image
The NOT operation of an image allows the bright and dark areas of the image to be
reversed.
1. Display the [Math] sub-panel of the [Process] panel at the front.
Fig. 2-94 [Math] Sub-panel
2. Display the [Display] panel of the image to be subjected to NOT operation at the
front. The icon of the image is displayed in the frame at the top left of the [Process]
panel.
<Divide 2 Images>
button
<Divide Image by>
button
<NOT Image> button
Executes a NOT operation.
Sets the image to be subjected to
operation. The icon of the image
To Next Page
Loading...
