Olympus FLUOVIEW FV300 - Image Output at Printer

APPLIED OPERATIONS/Image Output at Printer
IV. OPERATION INSTRUCTIONS
IV . 2-331
Page
2-13 Image Output at Printer
1. Display the [Display] panel of the image to be output at the printer.
2. Click the <Print> button in the toolbar at the bottom left of the panel. A dialog box as
shown below appears.
Fig. 2-148 [Print] Dialog Box
3. Select the connected printer name from the [Name] drop-down list.
4. If it is required to set the detailed data of the printer, click the <Properties> button in
the dialog box.
5. Click the <OK> button of the dialog box.
It is required to install and select the printer driver before the above
operation. Refer to the Windows manuals for details.
For the printer operation procedures, refer to the printer manuals.
<Print> button
NOTE