Getting Started FLUOVIEW/Outline of LSM Observation Procedures
IV.
OPERATION INSTRUCTIONS
IV.
1-45
Page
1-2-12-3 Setting the Channels
1. In the Channel 1 group box, check the check box showing the applicable dyeing
method to make the image acquisition ready.
2. In the Channel 2 group box, check the check box showing the applicable dyeing
method to ready the image acquisition.
To display the information on all channels simultaneously, right-click the
boundary between channel display boxes.
Click the boundary again to return to the original display.
CH2 check boxCH1 check box
TIP
To Next Page
Loading...
