Olympus FLUOVIEW FV300 - Exiting from the Software

Getting Started FLUOVIEW/Outline of LSM Observation Procedures
IV. OPERATION INSTRUCTIONS
IV. 1-53
Page
4. Enter the file name in the [File name:] text box.
5. Select “FLUOVIEW MultiTif” from [Save as type:]
6. Select the <Save> button.
1-2-16 Exiting from the Software
1. Click the <Exit> button in the toolbar at the bottom of the screen. This will allow you
to exit the software. The [Shut Down FLUOVIEW?] dialog box as shown below
appears.
2. To exit from this software, select the [Shut Down FLUOVIEW?] option button and
click the <OK> button. Then this software finishes.
3. To logout from this software, select the [Close all experiments and log in as a
different user?] option button and click the <Yes> button. The dialog box asking
whether to save the observation data or not appears. If you want to save the data,
click the <Yes> button, or the <No> button if saving is unnecessary.
It returns to the FLUOVIEW login screen.
4. To shut down Windows, select the Windows <Start> button to display the [Start]
menu, and select the [Shut Down] command from the menu.
5. When the [Shut Down Windows] dialog box appears, select the [Shut down the
Computer?] option box and select the <Yes> button.
Wait until message “It is now safe to turn off your Computer” is displayed
<Exit> button