APPLIED OPERATIONS/ Protocol processor
IV.
OPERATION INSTRUCTIONS
IV .
2-172
Page
2-4-5 Loading a Protocol
The Protocol Processor creates and saves protocol files in the CSV file format.
The following procedure loads a CSV file (extension .pap or .csv) for editing the protocol
in it.
1. Start the Protocol Processor software and display the [PAPP] window.
For details, see section 2-4-1, “Starting the Protocol Processor”.
2. In the [File] menu, select [Open].
The [File Open] dialog box appears as shown below.
3. Specify the file to be loaded in the box at the top left of the dialog box.
4. Click the <Open> button.
The loaded track data will be displayed in the [PAPP] window.
Select the file to be
loaded.
The preview of the file
selected in the box
above is shown here.
To Next Page
Loading...
