APPLIED OPERATIONS/Entering Comment in Image
IV.
OPERATION INSTRUCTIONS
IV .
2-320
Page
5. Select the character font and size using the [Font], [Font Style] and [Size] list
boxes.
6. Click the <OK> button to close the [Font] dialog box.
7. Place and click the mouse pointer on the image position you want to enter
characters.
8. Click the <Close> button to close the [Active Overlays] dialog box.
Refer to “Appendix I List of Functions in the [Active Overlays] Dialog Box”
for other functions of the [Active Overlays] dialog box.
2-12-2 Displaying the Image Intensity
The intensity of any pixel of an image can be displayed without using the [Analyze]
panel.
1. Display the [Display] panel of the image that you want to display the intensity at the
front.
2. In the list of buttons displayed, click the <Text> button. The dialog box as shown
below appears.
Fig 2-143 [Active Overlays] Dialog Box
3. In the drop-down list inside the dialog box, select” I = <intensity hotspot value>“.
4. On the image, place the mouse pointer on the position that you want to display the
intensity and click the mouse.
5. Click the <Close> button to close the [Active Overlays] dialog box.
<Text> button
TIP
To Next Page
Loading...
