Software Setup/Adding the dyeing method
V .
MAINTENANCE
V.
1-21
Page
1-4 Adding the dyeing method
Newly add a dyeing method and set laser type, excitation wavelength, and emission
wavelength.
This section describes a simple example of adding CFP as a dyeing method and setting
laser type, excitation wavelength, and emission wavelength.
Add the dyeing method using the [Fluorescent Dyes/Colors] panel in the [Fluoview
Setup] dialog box.
1. Double-click the [FLUOVIEW Setup] icon on the desktop.
The [FLUOVIEW User Login] dialog box as shown below appears.
2. Enter user name into the [User Name: ] text box and click the <OK> button to log
into FLUOVIEW FV500.
When using the system for one user, the [FLUOVIEW User Login] dialog
box does not appear.
[FLUOVIEW Setup] icon
TIP
To Next Page
Loading...
