Olympus FLUOVIEW FV300 - 2-4 Protocol processor

APPLIED OPRETIONS/protocol processor
IV. OPERATION INSTRUCTIONS
IV . 2-149
㪧㪸㪾㪼
2-4 Protocol processor
The Protocol Processor makes FLUOVIEW image acquisition flexible, especially time series image acquisition.
The function enables to create and modify the experiment procedure such as image acquisition condition with
interval setting, laser excitation area and its power setting.
The protocol can save and modify to be suitable to new experiment.
Refer to the reference sections written in the following diagram for detail operation.
Start the Protocol Processor.
(Section 2-4-1)
Acquire time series images using the protocol.
(Section 2-4-4)
Save the protocol.
(Section 2-4-3)
Turn power ON and start the FLUOVIEW software.
(Sections 1-2-1 and 1-2-2)
Edit the protocol.
(Section 2-4-2)
Exit from the FLUOVIEW software and turn power OFF.
(Sections 1-2-11 and 1-2-12)
Execute the post-processing.
(Sections 2-3 and after)
Load a protocol file.
(Section 2-4-5)