Appendix E Converting Analysis Data into a Chart Using EXCEL
IV.
OPERATION INSTRUCTIONS
IV .
E-1
Page
Appendix E Converting Analysis Data
into a Chart Using EXCEL
1. Start up Excel.
2. From the [File] menu of Excel, select the [Open] command to open the analysis
data file saved after analysis using FLUOVIEW.
3. When the dialog box as shown below appears, click the [Delimited] option button in
the [Original Data Type] group box, then select [Windows [ANSI]] from the [File
Origin:] drop-down list.
Fig. Appendix E-1 Dialog Box Displayed When File is Opened with Excel (1/3)
4. Click the <Next> button. When the dialog box as shown below appears, check the
[Tab] check box in the [Delimiters] check box, then select [(none)] from the [Text
Qualifier:] drop-down list.
Fig. Appendix E-2 Dialog Box Displayed When File is Opened with Excel (2/3)
To Next Page
Loading...
