APPLIED OPERATIONS/Entering Comment in Image
IV.
OPERATION INSTRUCTIONS
IV .
2-323
Page
2-12-5 Drawing a Scale in Image
A scale can be drawn between two points in an image.
1. Display the [Display] panel of the image in which you want to draw a scale.
2. Click the <Scale> button in the displayed list of buttons.
3. Click the image position you want to draw a scale.
4. Change the scale size. See 2-11-8, “Changing the Comment Size” for the operation
procedure.
To display a correct scale, it is required that the image has been
acquired while the objective magnification setting in the software
matches the magnification of the actually used objective.
A vertical scale can be drawn as well as a horizontal scale.
1. Click the mouse on the scale to turn the scale active (i.e. handles
displayed around the scale).
2. Click the right mouse button.
3. Select [Edit] from the displayed menu. A sub-menu as shown below
appears.
4. Select [Vertical Scale] to display a vertical scale.
<Scale> button
NOTE
TIP
To Next Page
Loading...
