Olympus FLUOVIEW FV300 - Building Line Images to be Viewed in Z Direction; Turning Built Image into Time Series Image

APPLIED OPERATIONS/Building an Image from a Different Viewpoint
IV. OPERATION INSTRUCTIONS
IV . 2-298
Page
2-8-1-3 Turning Built Image into time series image
From XYZT image, an extended-focus image can be built as a separate time series
image from the original image.
Use the [Visualize] panel to build the image.
First display the [Visualize] panel.
1. Display the [Display] panel of the XYZT image.
2. Click the [Extended Focus View] option button in the [Rendered View] group box.
3. Click the <Begin Visualize> button to start the image building. When it completes,
the built image is displayed in the [Extended] panel.
Fig. 2-124 Panel Showing Extended-Focus Image
2-8-2 Building line images to be viewed in Z direction
The images acquired by cutting the XYZ image off vertically and horizontally can be
displayed with the information on each line.
Each line images is created as a separate image from the original one.
To display the line images, use the [Visualize] panel.
Display the [Visualize] panel.