Olympus FLUOVIEW FV300 - Displaying Multiple Cross-Section Images; Displaying same Images in Different Display Methods

APPLIED OPERATIONS/Changing the Image Display Method
IV. OPERATION INSTRUCTIONS
IV . 2-217
Page
2-5-7-4 Displaying Multiple Cross-Section Images
Images acquired from different cross-sections can be displayed together for
simultaneous view.
The operation method is identical to the method for displaying time-lapse images except
for the following point. See section 2-5-7-3, “Displaying Time-Lapse Images”.
z Select [Z] from the [Tile Over] drop-down list.
Fig. 2-78 Panel Displaying Different Cross-Section Images Together
2-5-7-5 Displaying Same Images in Different Display Methods
Images composed of multiple image slices can be displayed in more than one display
methods together.
1. Display the [Display] panel of one of the images (image composed of multiple
slices) to be displayed together.
The icon of the image is displayed in the frame at the top left of the [Tile] panel and
the acquisition parameters used in image acquisition are displayed in the
[Experiment] panel.
2. Set the number of images to be displayed together by using the <
> and <
>
buttons in the [Columns] and [Rows] text boxes. How the images will be arranged
can be confirmed in the gray box at the upper part of the [Tiling] group box.
3. Select [Z] or [T] from the [Tile Over] drop-down list.