Getting Started FLUOVIEW/Online Help
IV.
OPERATION INSTRUCTIONS
IV
. 1-62
Page
1-3-2-3 Configuring the Filters
The barrier filters, excitation filter and beam splitter are set automatically to the light path
according to the dyeing method selected for the specimen.
Use the following procedure to change these filters.
1. From the panel page tabs shown on the bottom right of the [Acquire] panel, select
the [Settings] sub-panel.
Fig. 1-11 [Settings] Sub-panel
<SU Control> button
Click to display the filter and
laser types to be set.
(Combination with the laser
combiner sets up the laser
automatically.)
To Next Page
Loading...
