APPLIED OPERATIONS/Changing the Image Display Method
IV.
OPERATION INSTRUCTIONS
IV .
2-216
Page
2-5-7-3 Displaying Time-Lapse Images
Multiple images acquired over time can be displayed side by side for simultaneous view.
1. Display the [Display] panel of one of the time-lapse images to be displayed
together.
2. Set the number of images to be displayed together by using the <
> and <
>
buttons in the [Columns] and [Rows] text boxes. How the images will be arranged
can be confirmed in the gray box at the upper part of the [Tiling] group box.
3. Select [T] from the [Tile Over] drop-down list.
4. When the time-lapse images were acquired in a multi-channel mode, select the
display method from the [Display Type] drop-down list.
5. Click the <New Page> button. A new [Display] panel appears showing the images
displayed per channel.
Use the <Retile> button when it is required to re-arrange the images in
the currently displayed [Display] panel.
Fig. 2-77 Panel Showing Time-Lapse Images Together
NOTE
To Next Page
Loading...
