Getting Started FLUOVIEW/Basic Operations
IV.
OPERATION INSTRUCTIONS
IV .
1-17
Page
1-1-3 General Mouse Operation Procedures
Use the mouse to select a command, character string or button. Use the
left button of the mouse unless otherwise specified.
To select or execute something: Clicking
To click the mouse, place the mouse pointer on the desired function and
press the mouse button once.
(Pressing the right button of the mouse is referred to as right-clicking.)
To select something and execute its function: Double clicking
To double-click, place the mouse pointer on the desired function and press
the mouse button successively twice.
To move something: Dragging
To drag, place the mouse pointer on the desired function, and while
pressing and holding the mouse button, move the mouse to the desired
destination. At the desired destination, release the mouse button.
(Dragging by pressing the right button of the mouse is referred to as right-
dragging.)
One Point!
When the mouse is moved, the picture of arrow on the screen moves
accordingly. The picture which moves on the screen as the mouse is
moved is referred to as the mouse pointer.
To Next Page
Loading...
