Olympus FLUOVIEW FV300 - 2-3 Saving, Opening and Shredding Images

APPLIED OPERATIONS/Saving, Opening and Shredding Images
IV. OPERATION INSTRUCTIONS
IV . 2-111
Page
2-3 Saving, Opening and Shredding Images
Use the [File I/O] panel to save, open or shred an image.
Display the [File I/O] panel at the front.
Fig. 2-26 [File I/O] Panel
[Open]
To open a file, select the desired file in
the [Files] list box and drag the file here.
[Files] list box
Lists the image files of the
type selected with the [File
Type] drop-down list and their
<Experiment> button
Click to open the selected image file.
[Display] panel
Displays the image. The image file
name is shown in the panel page tab.
[File Type] drop-down list
Selects the type of the files to be
displayed in the [Files] list box.
[Directory] list box
Shows the hierarchical list of disks and
directories. Double-click the required
disk and directory. If the required
directory is not displayed, double-click
the hierarchical level above the current
level.
<Experiment> button
Saves the image displayed in the
[Display] panel together with its file
name.
< Display> button
Saves the image displayed in the
[Display panel] as if a hardcopyed
ima
g
e.
<Animation> button
Saves the animation image displayed in
the [Display panel].
<Up> button
Click to move to the directory above the
current directory in the [Files] list box.
<List> and <Details> buttons
These buttons switch the [Files] list box
display format.
Clicking the <List> button displays only
the file names. Clicking the <Details>
button displays the file names together
with the information (number of
channels, comment, etc.) of each file.
<Auto Numbering> check box
Enables automatic image file name
setting when this box is checked.
< File Name Header> text box
Enter the prefix for automatic image file
< Date_Time> option button
Date and time is added with the
image file name for auto numbering.
< Seq. Number> option button
Sequential number is added with the
image file name for auto numbering.