Olympus FLUOVIEW FV300 - Displaying Merged Image of Multiple Channels (Single Views)

APPLIED OPERATIONS/Changing the Image Display Method
IV. OPERATION INSTRUCTIONS
IV . 2-207
Page
2-5-4-2 Displaying Merged Image of Multiple Channels (Single Views)
1. Display the [Display] panel of the merged image of multiple channels at the front.
2. Click the <Display switching> button at the top of the [Display] panel. The list of
buttons as shown below appears.
3. From the displayed list of buttons, press the <Single View> button. The [Display]
panel will show the images of multiple channels side by side. At the same time, the
icon shown in the <Display switching> button will change to the icon of the <Single
View> button.
4. Click the image to display the <Display channel switch> buttons at the bottom left
of the image.
5. Click the <Channel 1>, <Channel 2> and/or <Channel 3> buttons of the <Display
channel switch> buttons.
The [Display] panel shows the merged image of the channels selected with the
<Display channel switch> buttons. At the same time, the clicked <Display channel
switch> buttons are displayed in the pressed-in condition.
Fig. 2-69 Panel Displayed Merged Image of Two Channels
<Display switching> button
<Single View>button
<Display channel switch>
buttons
<Channel 1> button
<Channel 2> button
<Channel 3> button