APPLIED OPERATIONS/Viewing Images Following the Progress of Time
IV.
OPERATION INSTRUCTIONS
IV .
2-311
Page
2-10 Viewing Images Following the Progress of Time
Images composed of multiple image slices (XYT, XYZT or XZT observation) can be
displayed following the time lapse to show the change over time.
2-10-1 Displaying Images Together
The change over time can be viewed at a glance by displaying multiple image slices
together. For the detailed operation method, see section 2-5-7, “Displaying Multiple
Image Slices Together”.
2-10-2 Displaying Images Successively
The change over time can also be displayed as animation.
With images composed of multiple slices, such as time-lapse images the buttons as
shown below are displayed at the top of the [Display] panel.
1. Display the [Display] panel of the image composed of multiple image slices.
2. To display XYZT observation images by noticing the progress of time, it is
required to select the <XYT series> button under the <Z/T series switch> button
at the top of the [Display] panel. If the <XYT series> button is not displayed, click
the <Z/T series switch> button and click the <XYT series> button in the displayed
list of buttons.
3. Display the image slice to start the successive display by using the <Display>
button at the top of the [Display] panel.
To Next Page
Loading...
