Appendix B List of Hot Keys
IV.
OPERATION INSTRUCTIONS
IV .
B-1
Page
Appendix B List of Hot Keys
Frequently-used FLUOVIEW functions (scanning, panel switching) can be controlled from the keyboard without
using the mouse.
z Image acquisition-related keys
Image acquisition channel selection
Key Target Operation
Cttrl + 1
Switches the status of the Ch1 check box (Ch1 scanned/not scanned).
Cttrl + 2
Switches the status of the Ch2 check box (Ch2 scanned/not scanned).
Cttrl + 3
Switches the status of the Ch3 check box (Ch3 scanned/not scanned).
PMT voltage/gain/offset adjustments
Key Target Operation
m
Enables and makes variable the LED slider on the left.
¤
Enables and makes variable the LED slider on the right.
p
Decreases the value of an enabled LED slider. (Fine adjustment)
Shift + p
Decreases the value of an enabled LED slider. (Coarse adjustment)
n
Increases the value of an enabled LED slider. (Fine adjustment)
Shift + n
Increases the value of an enabled LED slider. (Coarse adjustment)
An LED slider is enabled and variable when its setting values are
displayed in red.
Image acquisition (scanning)
Key Target Operation
F1
Displays the on-line help screen.
F2
Performs repeated scanning. [XY Repeat]
F3
Starts scanning according to the current scan mode. [Scan Once]
F4
Performs focus scanning. [Focus]
F6
Acquires another image after completing series image acquisition. [Append
Next]
NOTE
To Next Page
Loading...
