APPLIED OPERATIONS/Changing the Image Display Method
IV.
OPERATION INSTRUCTIONS
IV .
2-224
Page
2-5-9 Magnifying/Reducing an Image
The image can be magnified or reduced using the buttons displayed at the top of the
[Display] panel. Magnification or reduction up to 3:1 or 1:3 the original image is possible.
1. Display the [Display] panel of the image to be magnified or reduced.
2. The buttons as shown below are displayed on the top of the [Display] panel.
(Usually, the <Auto> button is displayed, and clicking it displays the list of buttons
shown below.) Us these buttons to magnify or reduce the image.
Fig. 2-83 Panel Showing a 2:1 Magnified Image
<AUTO> button
Magnifies or reduces the image according to the current [Display] panel
size.
<2:1> button
Magnifies the original image by 2 times.
<1:1> button
Displays the image in the original size.
<1:2> button
Reduces the original image by 1/2.
<1:3> button
Reduces the original image by 1/3.
<3:1> button
Magnifies the original image by 3 times.
To Next Page
Loading...
