Software Setup/Setting the System Configuration
V .
MAINTENANCE
V.
1-20
Page
1-3-2-4 Finishing the setting
Finishing the setup and closing the [Microscope Setup] window.
1. Click the < Save New Setup> button to save the setup and close the window.
Or click the <Quit w/o Saving> button to cancel the setup and close the window.
Then the dialog box as shown below appears. If you want to save, click the <Yes>
button, if you do not want to save, click the <No> button.
After saving is selected in the [Microscope Setting] window, the
original setting is not returned even if the <Quit w/o Saving> is clicked
in the [FLUOVIEW Setup] dialog box.
<Save New Setup> button
<Quit w/o Saving> button
NOTE
To Next Page
Loading...
