Software Setup/Setting the System Configuration
V .
MAINTENANCE
V.
1-19
Page
2 Setting the color of the button engaged into the light path
1. In [Microscope Control Panel] window on the software, specify the color of the
button of the cube, the objective, and the condenser engaged into the light path.
Right-click the mouse on the area outside of the buttons in the [Mirror Unit],
[Nosepiece], [Condenser Turret], or [Filter Turret] group box.
2. Select “Selected Hole Color”. The [Color] dialog box as shown below appears.
3. Select the color which you want to set in the color palette and click the <OK>
button.
To Next Page
Loading...
