Getting Started FLUOVIEW/Online Help
IV.
OPERATION INSTRUCTIONS
IV.
1-71
Page
㪋㪅 The following option button menu is displayed in the [Pfcl Setup Wizard] group box.
If you want to begin the parfocality correction value setting with the objective with
the maximum magnification, click the [Switch to...] option button then click the
<Next> button.
Click to set the objective with the
maximum magnification in the list as
the reference for correction of other
Click to set the objective being
selected in the [Objectives] group box
as the reference for correction.
To Next Page
Loading...
