Getting Started FLUOVIEW/Online Help
IV.
OPERATION INSTRUCTIONS
IV.
1-73
Page
㪍㪅 The [Pfcl Setup Wizard:] group box displays the option button menu shown below.
If you want to set the parfocality correction values of objectives with other power
values, simply click the <Next> button.
Click to proceed to the setting of the
objective with next higher power to the
current objective.
Click to select the desired objective
from the [Objectives] group box and
set the parfocality correction value for
it.
Click to save the currently set
parfocality correction values and
close the dialog box.
To Next Page
Loading...
