Olympus FLUOVIEW FV300 - Page 129

APPLIED OPERATIONS/Image Acquisition
IV. OPERATION INSTRUCTIONS
IV . 2-15
Page
To display the information on all channels simultaneously, right-click the
boundary between channel display boxes.
Click the boundary again to return to the original display.
4 Setting the Highest Scan Speed
Set the scan speed to the fastest speed by using the scale in the [Scan Speed] group
box in the [Acquire] panel
The focus mode makes it possible to increase the line skipped scan speed.
From the page tabs on the bottom right of the [Acquire] panel, select the
[Settings] sub-panel.
Select either option button in the [Focus Mode] group box.
The focus mode is enabled when acquiring images using the <Focus>
button.
The Focus function reduces the scanning time by line skipped scan.
As a result, the acquired images become coarse.
TIP
[Scan Speed] group box
Set the scan speed by clicking a point on
the scale line.
TIP
[Focus Mode] group box
[X2] option button
A
cquires image at twice the
highest speed.
[X4] option button
Acquires image at 4 times
the highest speed.
Increasing the number o
f
divided images in the
[Display] panel, line
skipped scan at 4 times
(Focus) cannot be done.
NOTE