Olympus FLUOVIEW FV300 - Page 186

APPLIED OPERATIONS/Image Acquisition
IV. OPERATION INSTRUCTIONS
IV . 2-72
Page
6. Change the inclination angle of the frame. Click the mouse right button inside the
frame and, when a pop-up menu appears, select [Rotate] from it.
7. The inclination angle of the frame can be varied according to the mouse pointer
movement.
Place the mouse pointer on an inclined position and click the mouse left button to
fix the frame inclination angle.
8. When using hardware that is compatible with rotation scan (FV5-IO3), specify the
image rotation angle using the rotation arrow buttons on both sides of the circuit in
the [Pan] group box in the [Acquire] panel.
9. Acquire the image by clicking <XYZ>, <XYT>, <XYZT> etc.
10. After image acquisition, select <Normal>under the [Surface XY] option button in
the [Mode] group box in the [Acquire] panel to return from the image acquisition
mode.
Dragging the blue handle
along the circuit allows the
acquisition area to be tilted.
A
ssuming that the angle at
the top of the circle is 90°, tilts
the acquisition area by 1° per
step in the counterclockwise
direction.
A
ssuming that the angle at
the top of the circle is 90°, tilts
the acquisition area by 1° per
step in the counterclockwise
direction.
Displays the image rotation
angle. The angle can also be
specified by direct entry.
A
ctual zoom
value a
pp
ears.