APPLIED OPERATIONS/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2-79
Page
A virtual channel will be added in the [Ch] group box. (Example: When [Using PMT
1] and [Using PMT 2] are selected from the pop-up menus.)
It is not permitted to set the physically identical channels (an ordinary
channel and virtual channel) in the same group. (For example,
ordinary channel 1 and virtual channel 1 cannot be set in the same
group.)
Sequential Group means a set of image channel which is acquired in a
sequential image acquisition.
Channel 1 and Virtual channel 1 needs to assign in deferent Sequential
Group since those channel can not acquire at the same time.
Virtual channel
NOTE
TIP
To Next Page
Loading...
