APPLIED OPERATIONS/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2-87
Page
The speed recommended for point scan are as follows.
2Ps(The scroll bar indicates “Fast” position. It is useful for the
specimen changes rapidly.), 10Ps, 100Ps(The scroll bar indicates
“Slow” position. It is useful for the specimen changes slowly.)
5. Set the time for measurement.
From the page tabs on the bottom right of the [Acuire] panel, select the [Time
Series] sub-panel.
Set the time for measurement with the <
> or <
> button in the [Scanning] text
box.
6. Set the starting method for image acquisition.
(If you have FLUOVIEW TIME COURSE software)
For setting procedure, see “FLUOVIEW TIME COURSE software user’s manual”.
x
T> button to acquire the image.
The image at the coordinates set in the [Live] panel appears in the image display
area and the graph showing the fluorescence intensity also appears in the graph
window.
TIP
[Scanning] text box
To Next Page
Loading...
