APPLIED OPERATIONS/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2-91
Page
6. Set the interval time or the number of scans.
The operating procedure is same as that in the XY observation mode. See section
2-2-2, “XT Observation Mode” for details.
Up to 8000 times, images can be acquired. Set the number of scans in
the [N] text box in the [Time Series] sub-panel.
7. Click <XZ>, <XT>, or <XZT> etc. to acquire the image.
The image shown in the [Live] panel after image acquisition is the
image that acquired at the curved line specified on the image and
arranged uprightly in the X direction, from the top to bottom.
The image shown after image acquisition is the same a width as that
in the X direction specified in the [Live] panel. (Same as that in the XT
observation mode).
8. After image acquisition, select <Normal> under the [Surface XY] option button in
the [Mode] group box in the [Acquire] panel to return from the image acquisition
mode.
TIP
TIP
To Next Page
Loading...
