APPLIED OPERATIONS/Saving, Opening and Shredding Images
IV.
OPERATION INSTRUCTIONS
IV .
2-115
Page
5. When it is required to change the save destination drive or directory, use the [Save
in:] drop-down list.
6. When it is required to change the saved file type, use the [Save as Type:] drop-
down list. See section 2-3-1-5, “File Types Available for Save” for details.
7. Enter the file name in the [File Name:] text box.
[Auto Numbering] is enabled image file name appears in [File Name] text
box. Then, the image file can store with the numbering just pressing
<Save> button.
8. Click the <Save> button.
If a file with the same name as the entered file name already exists, a
dialog box is displayed to ask if you want to overwrite the existing file.
If you do not want to overwrite it, click the <NO> button and enter
another file name.
NOTE
One Point!
The [Save Experiment As] dialog box can also be displayed by a mouse operation.
1. Display the image to be saved at the front of the [Display] panel, and right-
click a point in the image.
2. A pop-up menu as shown below is displayed.
3. Select [Save Experiment] from the menu.
TIP
To Next Page
Loading...
