Olympus FLUOVIEW FV300 - Page 234

APPLIED OPERATIONS/Saving, Opening and Shredding Images
IV. OPERATION INSTRUCTIONS
IV . 2-120
Page
5. Specify the area to be saved in the image in the [Display] panel.
The area is displayed on the image with the handles on its
frame.
The area becomes the save target while these handles are
displayed.
6. Click the <Annotate> button so that the list of buttons disappear.
7. Click the <Experiment> button in the [Save] group box.
The [Save Experiment As] dialog box appears.
Fig. 2-30 [Save Experiment As] Dialog Box
8. Use the [Save In:] drop-down list if you want to change the save destination drive
and directory.
9. Select “FLUOVIEW Multi Tiff” in the [Save as Type:] drop-down list.
It is not possible to save only the specified area of image in the Single TIF,
BMP or microVoxel format.
10. Enter the file name in the [File Name:] text box.
11. Click the <Save> button.
Handle
TIP