APPLIED OPERATIONS/Saving, Opening and Shredding Images
IV.
OPERATION INSTRUCTIONS
IV .
2-136
Page
4. Enter comment from the keyboard.
During modification of previously entered comment, if it is required to
restore the originally entered comment, click the <Restore Comments>
button. However, once the <Save Comments To Image> button is
pressed, the original comment cannot be restored.
5. Click the <Save Comments To Image> button.
At the moment the <Save Comments To Image> button is clicked, the
comment in the [Comments] panel is saved simply, but it is not yet
saved in the image file. To save the comment in the image file, use the
<Save> button in the [File I/O] panel.
6. Click the <OK> button.
7. Click the <Done> button in the [Experiments in Memory] dialog box to close it.
8. Display the [File I/O] panel at the front.
9. Click the <Experiment> button in the [Save] group box.
See section 2-3-1, “Saving Images” for details.
NOTE
NOTE
TIP
One Point!
The [Image Comments] dialog box can also be displayed by a mouse operation.
1. Display the image to be saved at the front of the [Display] panel, and right-
click a point in the image.
2. A pop-up menu as shown below is displayed.
3. Select [Experiment Properties] from the menu.
To Next Page
Loading...
