APPLIED OPERATIONS/Protocol processor
IV.
OPERATION INSTRUCTIONS
IV .
2-183
Page
1-㧠 Saving the Protocol
Save the edited protocol data.
The protocol can also be saved after being executed.
1. Select [Save] or [Save as] in the [File] menu in the [PAPP] window.
Save using the dialog box displayed.
For details, see section 0, “
1-㧡 Executing the Protocol
Executes the protocol.
1. Click the <Start> button in the [PAPP] window.
For details, see section 2-4-4, “Executing the Protocol”.
Fig. 2-58 Panel While Executing the Protocol
<Start> button
To Next Page
Loading...
