APPLIED OPERATIONS/Image Processing
IV.
OPERATION INSTRUCTIONS
IV .
2-237
Page
2. Click the <Experiment List> button in the toolbar at the bottom of the [Process] panel.
The [Experiments in Memory] dialog box appears as shown below.
Fig. 2-92 [Experiments in Memory] Dialog Box
3. From the [Experiments in Memory] dialog box, select the file name of the first image
and drag it to the frame at the top left of the [Process] panel. The icon of the image
is displayed in the frame at the top left of the [Process] panel.
Before the dragging and dropping, the frame at the top left shows the icon of
the image file displayed in the Display panel.
The mouse pointer turns into the image icon during dragging.
4. From the [Experiments in Memory] dialog box, select the file name of the second
file and drag it to the frame at the top right of the [Process] panel. The icon of the
image is displayed in the frame at the top right of the [Process] panel.
(No second file dragging is needed when the image processing is by value.)
The mouse pointer turns into the image icon during dragging.
5. Click the <Done> button in the [Experiments in Memory] dialog box to close it.
<Experiment List>
button
TIP
TIP
TIP
To Next Page
Loading...
