APPLIED OPERATIONS/Image Processing
IV.
OPERATION INSTRUCTIONS
IV .
2-266
Page
One Point!
Plural numbers of images can be appended without starting FLUOVIEW software.
1. Select <Start> button at bottom of Windows screen.
2. In case of Windows NT, select [Programs] – [Windows NT Explorer] command from
the [Start] menu. In case of Windows 2000, select [Accessories] - [Windows Explorer]
command from the [Start] menu. As shown below, Windows NT or Windows 2000
Explorer will appear.
3. Double click [FVAppend.exe] in [FLUOVIEW] folder at [C:] drive. Dialog box - [Append
on New dimension] will appear.
4. In case that the same operation as the procedures described in this manual is done,
the image will be appended and a new file will be created.
To Next Page
Loading...
