APPLIED OPERATIONS/Image Processing
IV.
OPERATION INSTRUCTIONS
IV .
2-269
Page
One Point!
When arbitrary portion of XYT image is extracted and plural numbers of [No. Display]
columns at T columns are selected, the dialog box as shown below will appear in case
that number of units at Z portion of [No. Display] on all T columns are not the same
number of units.
In [Extract] dialog box, grid candidates that are short appear in red.
Selection of grid candidates that are short is done as follows.
1. Verification will be done whether or not the same numbers of Z elements are selected
against all grids in T direction.
2. When there are grids in which Z elements are short, the selection of Z element
position equal to Z element that corresponds to previous T element will automatically
be done.
When <OK> button of [Extract Status] dialog box is clicked, the extraction for grids
including the grids displayed in red will be done . When <Cancel> button is clicked,
extraction will be aborted.
To Next Page
Loading...
