Olympus FLUOVIEW FV300 - Page 389

APPLIED OPERATIONS/Image Analysis
IV. OPERATION INSTRUCTIONS
IV . 2-275
Page
z To specify a free line:
On the image, drag the mouse pointer along the line
to be checked.
The line is displayed on the image together with the
handles on it. The intensity profile can be displayed
while the handles are displayed.
When the moues is clicked in other place than on the specified
line, the handles on the line disappear. The intensity profile
cannot be displayed when the handles are not displayed.
The checked line can be moved, deleted or changed of size or color.
This is possible with the same method as entering comment in the
image.
For details, see sections 2-12-6, 2-12-7, 2-12-8 and 2-12-9 in section
2-12, “Entering Comment in Image”.
6. Click the <Annotate> button so that the list of buttons disappears.
7. Click the <Begin Analysis> button. The intensity profile of the specified line will
be displayed in the [Intensity Profile] box of the [Analyze] panel.
Fig. 2-110 Panel After Analysis (Line Specification)
<Free Line> button
Handle
<Annotate> button
NOTE
TIP